Jackson Engineering
Tel. 01522 811354
Fax. 01522 811958
Email sales@jeukparts.co.uk
   

Doppstadt Parts

This page contains both Doppstadt high speed and low speed wear parts.

The Doppstadt slow speed shredder models are the DW2060, DW2560, DW3050 and the DW3080. Relevant jeukparts for these models are comb teeth and the wear plates that fit around the drum (not currently shown).

The Doppstadt high speed shredder models are the AK430, AK530, AK600 and the AK630.
The rest of the jeukparts listed belong to the high speed models.

The Duel Speed is the DZ750. All parts shown are genuine Jeuk parts.

We also supply parts for older models such as the AK230, AK250 and AK330

 


Doppstadt Spare Parts from JEUK Parts

Doppstadt Spares from JEUK Parts Doppstadt Spares from JEUK Parts

Doppstadt Spares from JEUK Parts Doppstadt Spare Parts from JEUL Parts

Doppstadt Spare Parts from JEUK Parts Doppstadt Spare Parts from JEUK Parts

Doppstadt Spare Parts from JEUK Parts

Doppstadt Spares from JEUK Parts Doppstadt Spares from JEUK Parts

Doppstadt Comb Gate from JEUK Parts

Doppstadt slow speed cleaning fingers Doppstadt Slow Speed Cleaning Fingers Doppstadt Slow Speed Cleaning Fingers

 Slow speed cleaning fingers  for DW 2560 and DW 3060
These come in a set of 12 , 10 large with 2 similar designs and 2 small end ones £POA


Doppstadt End Finger Doppstadt End Finger
End Cleaning finger. One to each side, left and right.

Doppstadt Cleaning Fingers and rotor wrappers

Slow speed  rotor area , above are the cleaning fingers and on the rotor can be seen the various  rotor drum wrappers which protect the drum from wear’
Doppstadt Kerbside Gate / Screen Doppstadt Kerbside Gate / Screen
JEUK 74 £2500 Kerbside Gate / Screen.
Ideal for green waste with comb fingers especially designed to prevent blocking, also can be used for food waste

Doppstadt Comb Teeth Refurbishments

Refurb your old comb teeth and regain your shredding efficiency. Jackson Engineering re-tipping service gives you the chance to prolong the life of your comb teeth.

Refurbished parts for Doppstadt from JEUK Parts Doppstadt refurbished parts from JEUK Parts Doppstadt refurbished parts from JEUK Parts
The old worn tip is removed The surface is prepared A new Hardox tip is welded back onto the holder and hard facing applied to the cutting edge
Our current price for this job is £36.00. Turnaround time normally under 10 days.

Doppstadt Ersatzeile

pieces d'usure pour broyeurs

Doppstadt czesci zamienne

partes amoladora desgaste


Additional models in the slow speed DW series which take jeukparts are the DW306, DW2060 E, DW2560 E, DW3060 E, DW4060 E, DW 3080 E2, DW 306 Ceron. These machines work on the single shaft principle and have a hydraulically controlled shredding comb through which the waste material is reduced and which opens automatically when oversize unshreddable  material masses force it to, therefore protecting itself. One the main differences between the various machines is the length of the shaft which also governs the input hopper length.

We also supply parts for the older high speed models, the AK 250 and AK 330. Static NZ180